Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Door Switch: Service and Repair
DOOR JAMB SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the door jamb.
2. Disconnect the door jamb switch electrical connector.
3. Remove the door jamb switch from the vehicle door pillar.
INSTALLATION PROCEDURE
IMPORTANT: When a new jamb switch is installed and the door is closed the first time, the plunger is forced into the sleeve and automatically
adjusts the jamb switch for that particular door. If a jamb switch fails, do not readjust the switch. Install a new jamb switch.
