Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Oil Pressure Sensor: Service and Repair
ENGINE OIL PRESSURE SENSOR OR SWITCH REPLACEMENT
TOOLS REQUIRED
J 35749 Oil Pressure Switch Socket
REMOVAL PROCEDURE
1. Turn off the ignition.
2. Remove the oil pressure sensor connector.
3. Remove the engine oil pressure sensor (1) using the J 35749
INSTALLATION PROCEDURE
1. Coat the sensor threads with sealer.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the oil pressure sensor (1) with the J 35749
Tighten
Tighten the sensor to 12 N.m (106 lb in).
3. Reconnect the oil pressure sensor connector.
