Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
9. Remove the oil filter.
10. Remove the oil filter O-ring seal.
11. Inspect the O-ring seal. The O-ring seal may be stuck in the case.
12. Remove all traces of old gasket material. Clean the transmission case and the oil pan gasket surfaces with solvent, and allow to air dry.
13. Inspect the oil pan for damage that may cause leaks. Replace the oil pan if necessary.
Installation Procedure
1. Coat the seal with a small amount of J36850 or equivalent.
2. Install a new seal into the case.
3. Install a new filter into the case.
4. Install a new oil pan gasket.
