Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Throttle Valve Cable/Linkage: Service and Repair
TV Cable Replacement (Automatic Transaxle-3T40)
Removal Procedure
Important: Observe the Throttle Valve (TV) cable routing when you remove the cable. Duplicate the cable routing when installing the cable.
1. Remove the TV cable end from the accelerator control lever assembly slot.
2. Remove the TV cable conduit end from the bracket by compressing the locking tangs.
3. Remove the TV cable routing clips or straps.
4. Remove the bolt that is securing the TV cable to the transmission. Pull up on the cable cover at the transmission until the cable is visible.
5. Remove the cable from the transmission link.
6. Remove the transmission case seal.
