Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transmission support assembly bolts.
^
Tighten the bolts to 75 Nm (55 ft. lbs.).
3. Install the transmission mount to the transmission support assembly.
4. Raise the engine and the transmission assembly.
5. Install the transmission mount to body bolts.
^
Tighten the bolts to 66 Nm (49 ft. lbs.).
6. Install the transmission pipe expansion bolt to the transmission support assembly.
^
Tighten the bolt to 55 Nm (41 ft. lbs.).
7. Install the P/S Pressure line to the P/S gear.
8. Install the P/S return line to the P/S gear.
9. Install the transmission cooler lines.
10. Install the left drive axle to the transmission.
11. Install the front suspension support.
12. Install the stabilizer shaft to the left lower control arm.
