Sunfire L4-144 2.4L DOHC VIN T SFI (2001)
2. Install the clutch pedal and bracket mounting nuts. Tighten. Start with the lower nuts, tighten the nuts to 23 Nm (17 ft. lbs.).
3. Install the instrument support bracket bolt.
4. Install the instrument panel support beam.
5. Install the clutch master cylinder pushrod bushing on the pedal. Lubricate the bushing.
6. Install the clutch master cylinder pushrod to the clutch pedal.
7. Install the cruise control switch.
8. Connect the following components:
^
The cruise control switch
^
The clutch position switch
9. Adjust the cruise control clutch switch, if equipped.
