Sunfire L4-2.2L VIN 4 (1996)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Modulator Assembly Removal and Instalation
Master Cylinder-Modulator Assembly
WARNING: To avoid personal injury, due to a retained load on the modulator assembly, the "Gear Tension Relief" function of the TECH 1
scan tool must be performed prior to removal of the brake control and motor assembly.
Remove or Disconnect
ABS Hydraulic Modulator Assembly Removal
1. Battery.
2. Air box.
3. Using Tech 1, perform "Gear Tension Relief Sequence".
Fluid Level Sensor
4. Electrical connector from fluid level switch (1).
