Sunfire L4-2.2L VIN 4 (1996)
For vehicles repaired under warranty, use the table.
2.2L and 2.4L With Manual Transaxle
Remove or Disconnect
1.
Disconnect battery cables and remove battery.
2.
Remove air cleaner assembly.
3.
Disconnect engine wiring harness at C100.
4.
Remove coolant reservoir.
5.
Secure coolant reservoir out of work area.
Important:
DO NOT open system by disconnecting hoses.
6.
Install engine support fixture # J 28467-360.
7.
Remove engine mount.
Important:
DO NOT disconnect AC line to perform repairs.
8.
Remove front tires.
9.
Remove front left and right splash shields.
10.
Remove RH fender brace (2 bolts).
11.
Remove left front transaxle mount assembly.
12.
Remove left rear transaxle mount assembly.
13.
From top of vehicle, shift engine assembly, shim or block in place to gain access to mount needing repair (use friction jack or equivalent).
Right Engine Mount Bracket Repair
(Automatic or Manual)
