Sunfire L4-2.2L VIN 4 (1996)
5.
Install overflow reservoir.
6.
Connect C100 of engine wiring harness.
7.
Install air cleaner assembly, relay center, and positive feed wire.
8.
Install battery and attach cables.
9.
Install air cleaner intake duct.
10.
Install splash shield and engine side covers (left and right).
11.
Install front tires.
2.2L and 2.4L With Automatic Transaxle
Remove or Disconnect
1.
Remove air cleaner duct.
2.
Disconnect battery cables and remove battery.
3.
Remove air cleaner assembly.
4.
Disconnect engine wiring harness at C100.
5.
Remove coolant reservoir.
6.
Secure coolant reservoir out of work area.
Important:
DO NOT open system by disconnecting hoses.
7.
Install engine support fixture # J 28467-360.
8.
Remove right motor mount.
Important:
DO NOT disconnect AC line to perform repairs.
9.
Raise vehicle and remove front tires.
10.
Remove left and right splash shields.
11.
Remove RH fender brace (2 bolts).
12.
Remove transaxle mount.
13.
From top of vehicle, shift engine assembly shim or block in place to gain access to mount needing repair (use friction jack or equivalent).
Right Engine Mount Bracket Repair
(Automatic or Manual)