Sunfire L4-2.2L VIN F (2002)
Front Door Weatherstrip: Service and Repair
Sealing Strip Replacement - Front Door Auxiliary
Sealing Strip Replacement - Front Door Auxiliary
Removal Procedure
1. Pull the roof weatherstrip back from the front auxiliary weatherstrip.
2. Remove the bolts (3) from the auxiliary weatherstrip.
3. Using a flat-bladed tool, remove the push-in retainer (2).
4. Remove the auxiliary weatherstrip (1) from the front column.
Installation Procedure
1. Position the auxiliary weatherstrip (1) on the front column.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the front auxiliary weatherstrip bolts (3).
Tighten the front auxiliary weatherstrip bolts to 2 N.m (18 lb in).
3. Install the push-in retainer (2) pressing in until fully seated.
