Sunfire L4-2.2L VIN F (2002)
Trunk / Liftgate Lock Cylinder: Procedures
LOCK CYLINDER REPLACEMENT - REAR COMPARTMENT LID
REMOVAL PROCEDURE
1. Remove the compartment lid applique (Pontiac only).
2. Remove the compartment lid latch cable assembly (8) from behind the lid lock. Spread the black plastic housing and pull down.
3. Remove the compartment lid lock cylinder retainer (4) (Cavalier only).
4. Drill out the rivets (Sunfire only).
5. Remove the compartment lid lock cylinder (1).
INSTALLATION PROCEDURE