Sunfire L4-2.2L VIN F (2002)
4. For the CHEVY BOW TIE emblem/nameplate (1), install to the following dimensions:
*
Center the emblem (1) from left to right on the hood.
*
The emblem (1) is 27 mm (1.063 in) from the front edge of the hood to the bottom of the emblem.
5. Heat the mounting surface to approximately 27-41°C (80-105°F) using the J 25070, if necessary.
6. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
Important: Do not touch the adhesive backing on the emblem/nameplate.
7. Remove the protective liner from the back of the emblem/nameplate.
8. Position the emblem/nameplate to the location marks and press the emblem/nameplate to the mounting surface.
9. Apply equal pressure along the emblem/nameplate to uniformly bond the item to the mounting surface.
10. Remove the protective tape from the mounting surface.
