Sunfire L4-2.2L VIN F (2002)
7. Remove the front floor console by lifting up and back. Guide the shift boot over the optional shift knob and over the emergency brake handle.
Installation Procedure
1. Install the front floor console by guiding the shift boot over the optional shift knob and over the emergency brake handle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts (6) to the front floor console.
Tighten the bolts to 10 N.m (89 lb in).
3. Lower the armrest (1).
4. Install the optional center storage pocket. Press into place until fully seated.
5. Install the optional power window switch plate.