Sunfire L4-2.2L VIN F (2002)
Sunroof / Moonroof Cable: Service and Repair
Sunroof Drive Cable Replacement
Tools Required
J 38043 Sunroof T-wrench
Removal Procedure
1. Remove the sunroof window.
2. Use J 38043 in the sunroof motor slot and manually lower the sunroof guides to the closed position.
3. Disconnect the sunroof actuator.
4. From above the vehicle, remove the left and the right cable retainer fasteners from the sunroof.
5. Remove the retainers.
6. Lift the drive cable end out of the guide assembly.
7. Hold the sunroof cable guide tubes in position.
8. Pull the cables out of the guide tubes.
Installation Procedure
Important: Do not kink the cables. Replace the cables if they are kinked. Replace the cables in pairs. Sunroof cables have a flexible sealer
at the tray assembly. Ensure that the seal is not broken during cable removal or installation.
1. Hold the cable tubes in position.
2. Push the sunroof drive cables into the guide tubes.
3. Engage the cables into the guide assemblies.
