Sunfire L4-2.2L VIN F (2002)
Front Door Weatherstrip: Service and Repair
Front Door Opening (Coupe)
REMOVAL PROCEDURE
1. Remove the carpet retainer from the vehicle.
2. Remove the windshield garnish molding.
3. Loosen the quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter in Interior Trim.
4. Pull the front door opening weatherstrip (1) loose and remove it from the vehicle.
INSTALLATION PROCEDURE
1. Apply weather-strip adhesive GM P/N 12345096 (Canadian P/N 993365) or equivalent, to the front door opening weatherstrip (1).
2. Install the front door opening weather-strip (1) onto the front door pinchweld, pressing into place until fully seated.
3. Install the windshield garnish molding.
4. Install the quarter trim panel.
5. Install the carpet retainer to the vehicle.
