pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Rear Door Opening|Page 8450 > < Seal Replacement - Hood Front|Page 8445
Page 1
background image

Rear Door Weatherstrip: Service and Repair
Rear Door Opening

REMOVAL PROCEDURE

1. Remove the carpet retainer.
2. Remove the upper center pillar trim panel from the vehicle.
3. Remove the rear lower quarter trim panel.
4. Remove the rear upper quarter trim panel.
5. Pull the rear door opening weatherstrip (2) loose.
6. Remove the weatherstrip (2) from the vehicle.

INSTALLATION PROCEDURE

1. Apply weatherstrip (2) adhesive GM P/N 12345096 (Canadian P/N 993365) or equivalent to the rear door opening weatherstrip.
2. Press the rear door opening weather-strip (2) onto the rear door opening flange.
3. Install the carpet retainer.
4. Install the upper center pillar trim panel in the vehicle.
5. Install the rear lower quarter trim panel.
6. Install the rear upper quarter trim panel.

Rear Door Opening|Page 8450 > < Seal Replacement - Hood Front|Page 8445