Sunfire L4-2.2L VIN F (2002)
Tighten the master cylinder brake pipe fittings to 24 Nm (18 ft. lbs.).
6. Install the caliper and the wheel cylinder brake pipes (1) to the BPMV (3).
Tighten the caliper and the wheel cylinder brake pipe fittings to 24 Nm (18 ft. lbs.).
7. Connect the EBCM harness connector (4).
8. Push down the lock tab (1) and then move the sliding connector cover back in the home position to lock.
9. Insert the CPA (2) back into place.
10. Perform the ABS Automated Bleed Procedure.
11. Perform the Diagnostic System Check - ABS.