Sunfire L4-2.2L VIN F (2002)
5. Disconnect the caliper and the wheel cylinder brake pipes (1) from the Brake Pressure Modulator Valve (BPMV) (3).
6. Swing the caliper and the wheel cylinder brake pipes out of the way only after covering the open pipes to avoid dripping or being contaminated.
7. Disconnect the master cylinder brake pipes (2) from the Brake Pressure Modulator Valve (BPMV) (3).
8. Swing the master cylinder brake pipes out of the way only after covering the open pipes to avoid dripping or being contaminated.
9. Remove the upper BPMV bracket mounting nut (3) that connects the upper BPMV mounting bracket to the lower mounting bracket (2).
Notice: Brake fluid will damage electrical connections and painted surfaces. Use shop cloths, suitable containers, and fender covers to prevent brake
flu d from contacting these areas. Always re-seal and wipe off brake fluid containers to prevent spills.
10. Remove the EBCM/BPMV assembly (4) from the vehicle.
11. Remove the EBCM (1) from the BPMV (2).
