pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Park Brake Cable Replacement - Front|Page 5488 > < Park Brake Cable Replacement - Front|Page 5486
Page 3
background image

11. Fold over the retaining clip.
12. Lower the vehicle.
13. Remove the left side carpet retainer. 
14. Remove the grommet and retainer from the floor pan.
15. Remove the front cable.

Installation Procedure 

1. Install the cable through the floor pan, from the interior of the car to the exterior of the car.
2. Install the cable into the clip.

3. Ensure that the pawl spring (5) is engaged with the notch on the ratchet (1).
4. Install the cable conduit fitting (3) to the lever assembly.

Park Brake Cable Replacement - Front|Page 5488 > < Park Brake Cable Replacement - Front|Page 5486