Sunfire L4-2.2L VIN F (2002)
Tighten the nuts to 25 Nm (18 ft. lbs.).
5. Connect the electrical connector (1).
6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Pull on the front parking brake cable at the rear of the vehicle in order to release the pawl spring from the notch on the ratchet (4).
8. Remove the safety stands. Lower the vehicle.
Notice: Refer to Self Adjusting Parking Brake Adjustment Notice in Service Precautions.
9. Fully apply and release the hand brake 4 - 6 times in order to activate the self adjust system.
10. Install the console.
