Sunfire L4-2.2L VIN F (2002)
2. Install the booster pushrod (2) to the brake pedal.
Tilt the entire vacuum booster slightly in order to work the booster pushrod onto the pedal clevis pin without putting undue pressure on the
pushrod.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the brake booster to brake pedal retaining nuts (7).
Tighten the booster to brake pedal retaining nuts to 27 Nm (20 ft. lbs.).
4. Install the left lower instrument panel.
5. Install the booster vacuum hose to the vacuum check valve.
6. Install the master cylinder (11) and the EBCM/BPMV to the booster (9).
7. Install the master cylinder retaining nuts (10).
Tighten the master cylinder retaining nuts to 27 Nm (20 ft. lbs.).
8. Install the air cleaner assembly.
