Sunfire L4-2.2L VIN F (2002)
Brake Switch (Cruise Control): Service and Repair
CLUTCH RELEASE SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left instrument panel insulator.
2. Disconnect the electrical connector from the cruise control release switch.
3. Remove the cruise control release switch from the brake pedal.
INSTALLATION PROCEDURE
1. Depress the brake pedal and insert the cruise control release switch into the bracket until the retainer is fully seated.
2. Connect the electrical connector to the cruise control release switch.
3. Adjust the cruise control release switch as needed. Refer to Clutch Release Switch Adjustment.
4. Install the left instrument panel insulator.
