Sunfire L4-2.2L VIN F (2002)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Removal Procedure
1. Remove the air inlet duct and resonator.
2. Disconnect the IAC electrical connector.
3. Disconnect the TPS electrical connector.
4. Disconnect the MAP sensor electrical connector.
5. Disconnect the EVAP hose.
6. Disconnect the PCV hose.
7. Disconnect the purge solenoid tube.
8. Disconnect the brake booster hose.
9. Remove the oil level indicator tube bolt.
10. Disconnect the accelerator and cruise control cables.
11. Remove the throttle body.
12. Remove the fuel rail.
