Sunfire L4-2.2L VIN F (2002)
Compressor Control Valve Assembly: Service and Repair
Compressor Control Valve ASM Install (V5 - Conventional Mount)
TOOLS REQUIRED
J 5403 Snap Ring Pliers
1. Coat the O-rings with 525 viscosity refrigeration oil.
2. Using thumb pressure, push the O-rings in place.
3. Install the valve into the case.
IMPORTANT: Ensure that the retaining ring is properly seated in the ring groove.
4. Using the J 5403, install the valve retaining ring (5) with the high point of the curved sides against the valve housing.
5. Perform a leak test. Refer to Compressor Leak Testing (V5 - Conventional Mount) or Compressor Leak Testing (V5 Direct Mount).
