Sunfire L4-2.2L VIN F (2002)
1. Install the HVAC module assembly. Align the mounting bracket (1) to the hole. Install the screw (2) to the mounting bracket.
Tighten
Tighten the bolt to 2 N.m (18 lb in).
2. Install the HVAC module attaching bolts near the heater hoses and the A/C evaporator lines.
Tighten
Tighten the bolts to 2 N.m (18 lb in).
3. Connect the gray vacuum line (1).
4. Connect the electrical connections at the following locations:
^
The blower motor
^
The blower resistors
5. Connect the wiring harness to the HVAC module assembly.
6. Install the floor air outlet.