Sunfire L4-2.2L VIN F (2002)
Brake Light Switch: Adjustments
Stop Lamp Switch Adjustment
Notice: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive
brake lining wear.
Important: Adjust the stop lamp switch and the cruise control release at the same time. The adjustment procedures for the stop lamp switch and the
cruise control release switch are identical.
1. With the brake pedal fully released, ensure that the stop lamp plunger is fully depressed against the brake pedal shanks.
2. Insert the stop lamp switch (1) and the cruise control switch (3), if equipped, into the brake pedal bracket (2).
3. Push the brake pedal forward in order to set the brake push rod into the booster.