Sunfire L4-2.2L VIN F (2002)
Malfunction Indicator Lamp: Service and Repair
CHECK ENGINE OR SERVICE ENGINE SOON
The malfunction indicator lamp (MIL) is located in the instrument panel cluster. The MIL will display as either "SERVICE ENGINE SOON" or one
of the following symbols when commanded ON:
RESET PROCEDURE
The only way to get the light to go off is to clear the PCM or BCM code(s).
This light can NOT be reset or shut off any other way.
PCM/BCM codes should be read & repaired before clearing them.
See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes