Sunfire L4-2.2L VIN F (2002)
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Install a new screw when replacing the IAC valve.
3. Install the IAC valve screw.
Tighten
Tighten the IAC valve screw to 3 N.m (27 lb in).
4. Connect the IAC valve harness connector (1).
5. Install the air cleaner outlet resonator.
6. Reset the IAC valve pintle using the following procedure:
6.1.
Turn ON the ignition, with the engine OFF.
6.2.
Turn OFF the ignition for 10 seconds.
6.3.
Start the engine and check for proper idle operation.