Sunfire L4-2.2L VIN F (2002)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Replacement - Chassis
REMOVAL PROCEDURE
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Disconnect the quick-connect fittings at the engine compartment fuel feed and return pipes.
3. Plug the fuel pipes.
4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Disconnect the quick-connect fittings at the fuel sender fuel feed and return connecting pipes.
6. Remove the exhaust heat shield.
7. Remove the fuel pipe mounting bolts from the body clips.
In the repairable areas, cut a piece of fuel hose 100 mm (4 in) longer than portion of the pipe removed. If more than a 152 mm (6 in) length of
pipe is removed, use a combination of steel pipe and hose so that hose lengths will not be more than 254 mm (10 in), including the hose overlap
on the fuel pipe.
8. Remove the fuel pipes from the body clips.
