Sunfire L4-2.2L VIN F (2002)
Resonator: Service and Repair
AIR CLEANER OUTLET RESONATOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the air cleaner duct from the air cleaner resonator.
2. Loosen the air cleaner outlet resonator to throttle body clamp (3), accessed through the accelerator bracket (2) slot.
3. Disconnect the intake air temperature (IAT) sensor harness connector (4).
4. Disconnect the vacuum pipe from the air cleaner resonator.
5. Loosen the vent hose clamp and move it away from the air cleaner resonator (2).
6. Disconnect the vent hose (1) from the air cleaner resonator (2).
7. Remove the air cleaner resonator (2) from the throttle body (3).
INSTALLATION PROCEDURE
