Sunfire L4-2.2L VIN F (2002)
11. Remove the following components from the rear axle (2):
^
The rear axle mounting bolts (4)
^
The washers (3)
^
The nuts (1)
12. Remove the rear axle (2) from the vehicle.
Installation Procedure
1. Install the rear axle (2) to the vehicle.
2. Install the following components to the rear axle (2):
^
The rear axle mounting bolts (4)
^
The washers (3)
^
The nuts (1)
Notice: Refer to Fastener Notice in Service Precaution.
3. Tighten the nuts.
Tighten the nuts to 120 Nm (88 ft. lbs.).