Sunfire L4-2.2L VIN F (2002)
Control Arm Bushing: Service and Repair
Front
Lower Control Arm Bushings Replacement
Tools Required
^
J21474-4 1/2 inch Nut
^
J21474- 18 3/8 inch Nut
^
J21474-19 3/8 inch Bolt
^
J23444-A High Pressure Lubricant
^
J41211 Lower Front Control Arm Vertical Bushing Set
^
J41397 Lower Control Arm Bushings Remover/Installer
Removal Procedure
1. Remove the lower control arm.
2. Secure the lower control arm in a vice.
Important: Apply J23444 A or equivalent high pressure lubricant to the threads of the J21474-19.
3. Assemble the following bushing removal tools as shown:
^
J21474-19
^
The remover/installer from the J41397
^
The receiver from the J41397
^
J21474-18
4. Tighten the J21474-18 until the front bushings removed from the control arm.
5. Disassemble the bushing removal tools.
6. Assemble the following bushing removal tools as shown:
^
J21474-27
^
The remover/installer from the J41211
^
The receiver from the J41211