Sunfire L4-2.2L VIN F (2002)
2. Install the J 29074 in order to support the clutch cover to the flywheel assembly.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the clutch cover to flywheel bolts.
3.1.
Follow the tightening sequence. Tighten the bolts to 20 Nm (16 ft. lbs.). Rotate 45 degrees.
3.2.
Tighten the bolts to specifications.
4. Remove the J 29074.
5. Lubricate the inside diameter of the bearing with GM P/N 12345777, or equivalent.
6. Install the transmission.
7. Bleed the hydraulic system.
8. Connect the negative battery cable.
