pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 15173 > < SIR Disabling and Enabling Zones|Page 15171
Page 14
background image

3. Connect the roof rail module - right connector to the vehicle harness connector.
4. Install the CPA to the roof rail module - right connector.
5. Install the rear coat hooks.
6. Install the rear headliner push-in retainers.
7. Install both the left and right rear corner garnish moldings.
8. Install the upper rear window molding.

9. Connect the seat belt pretensioner - RF connector to the vehicle harness connector and install the CPA.

SIR Disabling and Enabling Zones|Page 15173 > < SIR Disabling and Enabling Zones|Page 15171