pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Procedures|Page 15539 > < Procedures|Page 15537
Page 4
background image

HEAD RESTRAINT RETAINER REPLACEMENT - REAR SEAT

REMOVAL PROCEDURE

1. Remove the headrest.
2. Disconnect the lower J-hook retainer from the seat back trim cover.

3. Carefully pull up the trim cover, disengaging the hoop and loop retainers, until the headrest guides are exposed.
4. Squeeze the locking tabs on the headrest guide and pull the guides up and out of the seat back pad.

INSTALLATION PROCEDURE

1. Install the seat back trim cover over the top of the seat back.
2. Install the headrest guides by pressing the guides into position until the locking tabs engage.
3. Install the headrest. 

Procedures|Page 15539 > < Procedures|Page 15537