pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Parking Brake Cable|Service and Repair > < Parking Brake Cable|Description and Operation|Page 10711
Page 2
background image

16. Attempt to rotate the rear brake drums. There should be no rotation forward or rearward.
17. Fully release the park brake lever.
18. Verify the park brake is released by rotating the rear brake drums. The drums should rotate freely and exhibit no brake shoe drag.
19. If the drums do not rotate freely, repeat the park brake cable adjustment procedure.
20. Raise the park brake lever 3 detent positions and attempt to rotate the rear brake drums:

^

One of the brake drums should not rotate forward or rearward.

^

The other brake drum should not rotate forward or rearward, or should require substantial effort to rotate.

21. Raise the vehicle.
22. Remove the wheel nuts retaining the brake drums.
23. Install the rear tire and wheel assemblies. 
24. Lower the vehicle.
25. Install the front floor console. 
26. Release the park brake lever.
27. Enable the SIR system.

Parking Brake Cable|Service and Repair > < Parking Brake Cable|Description and Operation|Page 10711