Torrent AWD V6-3.4L VIN F (2006)
6. Remove the thermal bypass fitting bolt (2).
7. Remove the thermal bypass fitting (1).
8. Remove the seal from the thermal bypass fitting.
Installation Procedure
1. Install a new seal to the thermal bypass fitting.
2. Apply engine coolant to the thermal bypass fitting seal to ease installation.
3. Install the thermal bypass fitting (1).
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the thermal bypass fitting bolt (2).
Tighten the bolt to 12 Nm (106 inch lbs.).
