Torrent AWD V6-3.4L VIN F (2006)
4. Install the water pump pulley (1). Loosely install the pulley bolts (2).
5. Insure the drive belt is properly centered on all the pulleys except the right idler puller (3).
6. Using the J 39914 rotate the drive belt tensioner away from the drive belt.
7. Install the drive belt to the right idler pulley (2).
8. Carefully release the J 39914 allowing the drive belt tensioner (8) to come in contact with the drive belt.
9. Remove the J 39914 from the drive belt tensioner (8).
10. Inspect the drive belt to insure the belt is properly centered on all the pulleys (1- 8).
11. Tighten the water pump pulley bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
12. Fill the cooling system.
13. Inspect the cooling system for leaks.
