Torrent AWD V6-3.4L VIN F (2006)
Engine Mount: Service and Repair
Engine Support Fixture
Engine Support Fixture
Installation Procedure
^
Tools Required
-
J 28467-B Universal Engine Support Fixture
-
J 36462-A Engine Support Adapter Leg Set
-
J 28467-13 Engine Support Fixture Adapters
-
GM P/N 11519137 4 Studs or equivalent
1. Remove the fuel injector sight shield.
2. Pull each end of the hood rear seal away from the cowl panel flange near both strut towers.
Notice: Refer to Fastener Notice in Service Precautions.
3. Replace 2 strut bolts with studs GM P/N 11519137 on right and left sides of the vehicle for installation of support fixture.
^
Tighten the studs to 25 Nm (18 ft. lbs.).
