Torrent AWD V6-3.4L VIN F (2006)
3. Install the engine front cover (1) to the engine block aligning the cover with the locating pins.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the engine front cover bolts (3, 4).
^
Tighten the bolts to 55 Nm (41 ft. lbs.).
5. Install the engine front cover bolts (2).
^
Tighten the bolts to 27 Nm (20 ft. lbs.).
6. Install the radiator outlet hose to the engine front cover.
7. Install the thermostat bypass hose adapter.
8. Install the water pump.
9. Install the right engine mount bracket (1).
10. Install the right engine mount bracket bolts (2-4).
^
Tighten the bolts to 55 Nm (41 ft. lbs.).
11. Install the engine mount bracket bolts (3).
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
12. Install the left belt idler pulley.
13. Raise and support the vehicle. Refer to Vehicle Lifting.
14. Install the engine oil pan.
15. Install the lower belt idler pulley.
16. Install the crankshaft balancer.
17. Lower the vehicle.
18. Install the drive belt.
19. Remove the engine support fixture.
20. Install the air cleaner assembly.
21. Connect the negative battery cable.
22. Fill the cooling system.
