Torrent AWD V6-3.4L VIN F (2006)
1. Lightly coat the new O-ring with mineral base 525 viscosity refrigerant oil.
IMPORTANT: Lubricate the new O-ring prior to installation on the compressor hose.
2. Install the new O-ring to the pressure relief valve.
3. Install the pressure relief valve to the compressor.
Tighten the pressure relief valve to 9.8 N.m (87 lb in).
NOTE: Refer to Fastener Notice.
4. Lower the vehicle. Refer to Vehicle Lifting.
5. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
6. Test the affected A/C joint for leaks using J 39400-A.
