Torrent AWD V6-3.4L VIN F (2006)
4. Install the blower motor resistor to the blower case assembly.
5. Install the blower motor resistor screws to the blower case assembly.
Tighten the screws to 1.5 N.m (13 lb in).
6. Install the blower motor to the blower case assembly.
7. Install the blower motor screws to the blower case assembly.
Tighten the screws to 1.5 N.m (13 lb in).
8. Install the HVAC module wire harness from the blower case assembly.
9. Install the air inlet assembly.
10. Install the evaporator case assembly.
11. Install the HVAC module.
