pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Refrigerant > < Receiver Dryer|Service and Repair|Page 13157
Page 3
background image

5. Install the lower receiver dehydrator bolt to the condenser.

Tighten the bolt to 6.5 N.m (58 lb in).

NOTE:  Refer to Fastener Notice.

6. Install the receiver dehydrator mounting clamp to the condenser.
7. Install the receiver dehydrator mounting clamp bolt to the condenser.

Tighten the bolt to 4.2 N.m (37 lb in).

8. Install the front bumper fascia. 
9. Evacuate and charge the A/C system. Refer to Refrigerant Recovery and Recharging.

10. Test the affected A/C joints for leaks using J 39400-A.

Refrigerant > < Receiver Dryer|Service and Repair|Page 13157