pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 16012 > < SIR Disabling and Enabling Zones|Page 16010
Page 4
background image

4. Locate the body control module fuse center. Remove fuse center cover.

5. Locate and remove the AIR BAG fuse from the body control module fuse center.

IMPORTANT:  With the AIR BAG fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is
normal operation, and does not indicate an SIR system malfunction.

6. To disable the roof rail module - left, perform steps 7-13. To disable both the side impact sensor (SIS) - LF and the seat belt pretensioner - LF,

perform steps 14-18.

7. Remove the upper rear window molding.
8. Remove both the left and right rear corner garnish moldings.
9. Remove the rear headliner push-in retainers.

10. Remove the rear coat hooks.
11. Gently pull down the left rear corner of the headliner to access the roof rail module - left connector.

12. Remove the connector position assurance (CPA) from the roof rail module - left connector.
13. Disconnect the roof rail module - left connector from the vehicle harness connector.
14. Remove the lower center pillar trim.

SIR Disabling and Enabling Zones|Page 16012 > < SIR Disabling and Enabling Zones|Page 16010