pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 16013 > < SIR Disabling and Enabling Zones|Page 16011
Page 5
background image

15. Remove the CPA from the seat belt pretensioner - LF connector.
16. Disconnect the seat belt pretensioner - LF connector from the vehicle harness connector.

17. Remove the CPA (2) from the SIS - LF connector.
18. Disconnect the SIS - LF (1) from the vehicle harness connector (3).

ENABLING PROCEDURE

1. Remove the key from the ignition switch.
2. To enable the roof rail module - left, continue to step 3. To enable both the side impact sensor (SIS) - LF and the seat belt pretensioner - LF,

continue to step 9.

SIR Disabling and Enabling Zones|Page 16013 > < SIR Disabling and Enabling Zones|Page 16011