pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 2770 > < SIR Disabling and Enabling Zones|Page 2768
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
SIR Disabling and Enabling Zone 2

SIR DISABLING AND ENABLING ZONE 2

DISABLING PROCEDURE

1. Turn the steering wheel so that the vehicles wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Locate the body control module fuse center. Remove fuse center cover.

5. Locate and remove the AIR BAG fuse from the body control module fuse center.

IMPORTANT:  With the AIR BAG fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is
normal operation, and does not indicate an SIR system malfunction.

6. To disable the roof rail module - left, perform steps 7-13. To disable both the side impact sensor (SIS) - LF and the seat belt pretensioner - LF,

perform steps 14-18.

7. Remove the upper rear window molding.
8. Remove both the left and right rear corner garnish moldings.
9. Remove the rear headliner push-in retainers.

10. Remove the rear coat hooks.
11. Gently pull down the left rear corner of the headliner to access the roof rail module - left connector.

SIR Disabling and Enabling Zones|Page 2770 > < SIR Disabling and Enabling Zones|Page 2768