Torrent AWD V6-3.4L VIN F (2006)
1. Route the liquid line below the battery box and the ground lug.
2. Connect the negative battery cable nut to the wheelhouse.
Tighten the nut to 12 N.m (106 lb in).
NOTE: Refer to Fastener Notice.
3. Remove the protective caps from the condenser, the evaporator outlet hose, and the TXV.
4. Install the new sealing washer to the liquid line.
5. Route the condenser end of the liquid line into position.
6. Install the liquid line to the condenser.
7. Install the liquid line nut to the condenser.
Tighten the nut to 22 N.m (16 lb ft).
IMPORTANT: Use a large pair of pliers to hold the fitting while tightening the nut. Be careful not to twist the line.
