pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Electronic Throttle Actuator > < Data Link Connector Description|Page 6081
Page 2
background image

4. Enable the SIR system. 
5. Reprogram the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration.

IMPORTANT:  If you do NOT perform the BCM programming procedure, the vehicle option content information which is read by the BCM may be
incorrect and a DTC B1001 Option Configuration Error will set in both the SDM and the BCM. This will illuminate the AIR BAG telltale.

Electronic Throttle Actuator > < Data Link Connector Description|Page 6081