Torrent AWD V6-3.4L VIN F (2006)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor Replacement - Position 2
HEATED OXYGEN SENSOR REPLACEMENT - POSITION 2
REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Disconnect the HO2S 2 harness connector (3).
3. Use a liquid penetrate before removing the sensor.
IMPORTANT: Silicone based products will contaminate the HO2S. DO NOT use products containing silicone on or near the HO2S.
4. Remove the HO2S 2 (2) from the exhaust pipe.
INSTALLATION PROCEDURE
1. Apply a small amount of anti-seize compound to the threads of the HO2S 2.
NOTE: Silicone based products will contaminate the HO2S. Use only a nickel based anti-seize compound that does not contain silicone.