Torrent AWD V6-3.4L VIN F (2006)
Fuel Supply Line: Service and Repair
Fuel Hose/Pipes Replacement - Chassis
FUEL HOSE/PIPES REPLACEMENT - CHASSIS
REMOVAL PROCEDURE
CAUTION:
-
Do not allow smoking or the use of open flames in the area where work on the fuel or EVAP system is taking place. Anytime work is being
done on the fuel system, disconnect the negative battery cable, except for those tests where battery voltage is required.
-
Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
-
Whenever fuel lines are removed, catch fuel in an approved container. Container opening must be a minimum of 300 mm (12 in) diameter
to adequately catch the fluid.
NOTE: Fuel/Vapor lines cannot be spliced or repaired. The line must be replaced (if damaged) with the same type of line.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
2. Disconnect the negative battery terminal.
3. Disconnect the engine compartment fuel hose/pipe (2) from the chassis fuel hose/pipe (3).
4. Cap the fuel hose/pipes to prevent contamination and fuel leakage.
5. Raise the vehicle. Refer to Vehicle Lifting.
